NiMH Battery Pack Charger, PP45
search
  • NiMH Battery Pack Charger, PP45

NiMH Battery Pack Charger, PP45

AED141.75
Tax included Delivered Within 5 Working days

The Studica NiMH Battery Pack Charger, PP45, is used to recharge the 12V 3,000 mAh NiMH Battery Pack, PP45.  It is a smart charger that auto detects battery pack voltage, sets up proper charging voltage and cuts off power automatically by negative delta V IC when the battery pack is fully charged. 


Quantity
Last items in stock

Specification:

  • PP45 connector for quick and safe connection to battery pack.
  • Input: AC 100-240V
  • Output Voltage: 7.2V-12V
  • Charging Current: 0.9A/1.8A
  • Applicable Battery Types: NiMH/NiCd
  • Do not overcharge
    • Disconnect the battery from the charger once it indicates a full charge.
    • Typical charge time does not exceed 2 hours.
    • Do not charge a battery that hasn't been discharged significantly. Running the robot under minimal load for a few minutes will not significantly discharge the battery.
  • Minimum no-load voltage: 9.0V
    • Discharging the battery past 9.0V can reduce the lifespan of the battery and can permanently damage the cells.
    • Periodic dips below 9.0V when under load is expected and OK. Don't forget to unplug your battery after you are finished running the robot and don't run your robot until it completely stops responding!
  • Operating Temp: 0 ~ 40°C
    • Let the battery cool before and after charging.
    • The battery may feel warm after heavy loading or after charging. This is norma
70019
1 Item