• New
WS500 UAV Quadcopter Kit
search
  • WS500 UAV Quadcopter Kit
  • WS500 UAV Quadcopter Kit

WS500 UAV Quadcopter Kit

AED13,146.00
Tax included

The Studica WS500 UAV Quadcopter Kit is a lightweight robust UAV open platform specially designed for learning and teaching. It comes with the WS500 EDU Frame Kit and motors, ESCs, power frame integrated power distribution panel. It has a CubePilot flight controller with companion Raspberry Pi 5, an optical flow and distance sensor module with 6-axs IMU, a ToF (Time of Flight) 3D depth camera (with custom mount), and T-mini Plus lidar for obstacle avoidance and advanced navigation. 

 

All tools for installation are provided in box.

 

Note: Battery not included. We recommend 4S 5200mAh + with XT60 Lipo Battery. You can purchase this in your local country.

 

Quantity
Available on backorder

Includes:

  • Carbon Fiber frame with fiber-reinforced nylon connectors providing easy & straightforward installation
  • Flight controller
  • HS2216 920KV motors & ESCs with simple XT30 power plugs for PDB
  • Frame Integrated Power distribution panel with XT60 & XT30 plugs
  • Included companion computer installed (Raspberry Pi 5)
  • ROS2 support with MAVROS
  • T-Mini Lidar Module
  • 3D Depth Camera
  • Optical flow and distance sensor module with 6-axs IMU
  • Custom depth camera mount for included 3D depth camera
  • 4pcs 1045 Propeller
  • LED light package for each arm
  • Landing Gear Set with 93mm X 30mm foam feet
  • Battery mount with 2 battery straps
  • Electronics protection cover with T-mini lidar mount
  • Propeller guards
  • All cabling
  • Package Dimensions: 31.4 cm × 31 cm × 43 cm
  • Complete Package Net Weight: 6.7 kg
  • Installation, Startup and Curriculum modules for classroom learning

  • Installation and repair toolkit including:

    • Portable Soldering Iron kit with bag

    • 4pcs Hex Screw Driver Set

    • Multi wire strippers

    • Mini diagonal pliers

    • Electronic cutting pliers

    • Mini long nose pliers

    • Tweezer Set

    • Thread Locker

    • Storage box

Mechanical Specification:

  • Wheelbase: 450mm
  • Wingspan 570mm
  • Motor mount pattern: 16x16mm & 19x19mm
    Frame Body: 170x150mm, 2mm thick
  • Landing gear height: 215mm
  • Space between top and bottom plates: 50mm
  • Frame Weight: 870g
  • Flight time: ~18 minutes hover with no additional payload. Tested with 5200mAh Battery.
  • Payload: 960g (without Battery, 70% Throttle)
  • Battery Recommendation: 4S 5300mAh (Not Included)
90200