WorldSkills Mobile Robotics Collection 2019
  • WorldSkills Mobile Robotics Collection 2019

WorldSkills Mobile Robotics Collection 2019

AED13,650.00
Tax included

The WorldSkills Mobile Robotics Collection 2019 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition

Quantity
There are not enough products in stock

  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)

The WorldSkills Mobile Robotics Collection 2019 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Teams can use this package for the WorldSkills Mobile Robotics Competition in Kazan in 2019. It also includes training material and can now be used in the classroom to teach robotics and controls using LabVIEW.  

The 2019 edition has been modified based on feedback from past competitions and WSMR experts to better reflect the needs of the competition. Users can also complement the collection with additional add-on component kits such as structural packs, track drive systems, wheel packs, mecannum wheels and all-terrain wheels that are fully compatible with the build system and can be found on this web store.

New for 2019 is the addition of the Studica WSR Blackhawk Robot Expansion Board. The Studica WSR Blackhawk Robot Expansion Board is a programmable brain for your WorldSkills Mobile Robot. It is used with the MD2 board and the NI myRIO to controller to control motors, sensors, limit switches and more.

Includes Everything You Need (Over 800 components),

  • Sensors, Controllers, and Batteries
    • Blackhawk Robot Expansion Board
    • Limit Switches
    • myRIO Competition Kit with 3 LabVIEW Licenses
    • MyRIO Mount
    • MXP-MD2 Motor Driver Adapter for NI myRIO
    • Camera
    • navX 9-axis Inertial/Magnetic Sensor
    • PING ultrasonic Distance Sensor
    • IR Range Sensor (10 cm to 80 cm)
    • Line Follower Sensor
    • 12V 3,000 mAh NiMH Battery Pack w/20 amp fuse
    • ON/OFF Power Switch
    • NiMH Battery Pack Charger
    • Wires and Protoboard 
       
  • Structural Components
    • Metric heavy-duty aluminum channel pieces . Enhanced Rack and Pinion Linear Slide, Aluminum Spacers, Linear Motion Shaft and Slide Units, Pivot Arm, Small Beams and Linkages, Gussets and Plates.    
       
  • Motors and Motor Controls
    • The DC Motor are 12-Volt, 100 rpm and 700 oz-in of torque compared to 320 oz-in. of torque in the old motors.  Built-in encoders which will save time in assembly and eliminate in mistakes.   
       
  • Wheels, Gears and Drive Train
    • 101mm Omni wheels for a greater range of travel options. This will allow for 4 wheel independent drive or 2 wheel gear or chain drive systems. Shaft hubs and a greater selection of spacers, bushings, axles and hubs have also been added. A timing belt and pulleys are also now included.    
       
  • Fasteners
    • Various fasteners are included. Thumbscrews allow for rapid prototyping solutions

 the traditional japanese origamis. To wear with a chino or jeans. The sublimation textile printing process provides an exceptional color rendering and a color, guaranteed overtime.

WSMR19